7hp wards sea king clinton help?

[dtb33]

model # k700 2107a
serial # 650613
type 60 27370 R

i want to know the year of the motor and where i can get parts. i'm looking for a fuel fitting so i can try and keep it running. i got it from my dad which it had been in his barn for who knows how long. i put fuel in the cylinder and it pops over a few times. any help would be great thanks David

 

[chris_222]

Re: 7hp wards sea king clinton help?

model # k700 2107a
serial # 650613
type 60 27370 R

i want to know the year of the motor and where i can get parts. i'm looking for a fuel fitting so i can try and keep it running. i got it from my dad which it had been in his barn for who knows how long. i put fuel in the cylinder and it pops over a few times. any help would be great thanks David

 

[chris_222]

Re: 7hp wards sea king clinton help?


I know a guy who knows a fair bit about these old outboards but i havent talked to him in a long time. i can look up his number if you want

model # k700 2107a
serial # 650613
type 60 27370 R

i want to know the year of the motor and where i can get parts. i'm looking for a fuel fitting so i can try and keep it running. i got it from my dad which it had been in his barn for who knows how long. i put fuel in the cylinder and it pops over a few times. any help would be great thanks David

 

[fish4joy2005]

Re: 7hp wards sea king clinton help?

model # k700 2107a
serial # 650613
type 60 27370 R

i want to know the year of the motor and where i can get parts. i'm looking for a fuel fitting so i can try and keep it running. i got it from my dad which it had been in his barn for who knows how long. i put fuel in the cylinder and it pops over a few times. any help would be great thanks David

 

[fish4joy2005]

Re: 7hp wards sea king clinton help?

Try www.discount-marine-parts.com , OR 906-466-2180
They are in Bark River ,MI . I hope this helps

 

[steelespike]

Re: 7hp wards sea king clinton help?

Your motor is a Clinton 74-75 7 hp at 6,000 rpm.
Clinton has been out of business for some years.
The motor has an aircooled power head with a water cooled exhaust leg.Some Clintons use a Chrysler connector.If you look under Chrysler here on iboats there is probably the connector you need.
These motors are marginal performers.I wouldn't put
too much money into repairs.I feel you would be better off selling it and put the money toward a used Evinrude/Johnson/Gale 5, 5.5, 6, 7.5 From the mid 50s on up.All these motor will out perform the Clinton and they will do it smoother and quieter have full gear shift and routine parts are still readily available.