95 40hp 2 stroke 4 cyl

[JoshuaFisher]

I have no audible horn when turning on the ignition, trying to verify it at least works... tried grounding out the wires that are connected to module but no luck.. any advice much appreciated, don't know where to go from here. Read something about not all motors have the horns but seeing as how this is oil injected it definitely should right? Serial number 0g192815

Thanks

Josh

 

[carholme]

Re: 95 40hp 2 stroke 4 cyl

Your s/n comes up as:

MERCURY - ( 40 H.P. (1995 ))
Serial No: 0G192815 Model No: 1040412RT

Parts and Service Bulletin List for s/n 0g192815:

Search Results - Crowley Marine

The service manual (with the testing you require) is P/N 90-814676. If you do not have the manual, see my message to you in Notifications at the top of the page.

Gerry

 

[JoshuaFisher]

Re: 95 40hp 2 stroke 4 cyl

Thanks! Dont suppose you know off the top of your head if this motor should chirp when i turn the key?

 

[carholme]

Re: 95 40hp 2 stroke 4 cyl

Each time the key switch is turned from the “off” to
“on” position (engine not running); the warning horn
will sound momentarily. This tells you the warning
system is functional and the warning horn is operational.
If warning horn does not sound or horn stays
on when key is turned to the “ON” position, refer to oil
injection system troubleshooting chart following to
correct the problem.

Gerry

 

[JoshuaFisher]

Re: 95 40hp 2 stroke 4 cyl

Well its the low oil sensor in the tank, does anyone know if i can change just the sensor or do i have to order a whole new tank? Thanks in advance!