delfinasul
Seaman
- Joined
- Feb 15, 2007
- Messages
- 69
Yesterday i was out with my boat and i make'it some test for determining if the autoprotection works on my motor. I removed from the oil tank the oil sensor and let him free to simulate lack of oil in reservoir, starded the engine and run at WOT for a minute....no beeps, no rev limit in action..just running as usual...Next test , disconect purple wire from oil sensor (i think) mounted on the oil line , run at WOT ..same result..no rev limit or other warning...Could be the protection sistem disabled?