adding oil to 1995 evinrude 150 hp

[ALAN CAIN]

I don't see a location for adding the oil to my 1995 2 stroke evinrude 150 hp outboard that I just bought. The manual shows the oil being added directly into the gas tank at the same time as the gas is being pumped into the boat, both through a large funnel. Does this sound correct? Thanks.

 

[Silvertip]

Re: adding oil to 1995 evinrude 150 hp

Look carefully at the engine where the fuel line goes into the engine. If you see two hoses, follow the one that "does not" go to the fuel tank. That hose leads you to the separate oil resevoir which is where you add the oil. If you only see one hose going into the engine, the oil injection system has apparently been removed and you must pre-mix fuel. One point of TCW-3 two cycle oil to every six gallons of fuel. You do not do both. If the oil injection is still in place you do not pre-mix. If it is not in place, you must pre-mix.