Any advice for torquing 2 low clearance nuts on new riser

[pmill]

I'm not sure how to go about torquing the 2 nuts on the middle studs of this style riser, no way to get a socket in there. Any advice?

 

[pmill]

No Title

 

[midcarolina]

I'm guessing many DIY mechanics go by feel ( guess ) professional mechanics use a torque wrench adapter..........

 

[alldodge]

Just snug them up good, you should be fine

 

[Bondo]

I'm guessing many DIY mechanics go by feel ( guess ) professional mechanics use a torque wrench adapter..........

Ayuh,.... Experienced Mechanics use an end wrench, 'n calibrated elbow,....

 

[bruceb58]

I'm guessing many DIY mechanics go by feel ( guess ) professional mechanics use a torque wrench adapter..........

Agreed.

http://www.amazon.com/Motion-Pro-08...keywords=torque+wrench+adapter#productDetails

 

[pmill]

Thanks for the advice, that adapter looks like another seldom used specialty I'm going to have to invest in, but I don't want to take chances of totally missing the specs and having a leaky gasket.