Shouldn't Have
Seaman Apprentice
- Joined
- May 5, 2009
- Messages
- 37
Twin AQ260A engines. Boat purchased last year. I ran WOT only twice last year, and I don't recall what RPM they reached.
Work done on the engines to date is:
Replaced plugs and wires.
Replaced distributor cap and rotor.
Replaced ignition coil on port, starboard appears to be relatively new.
Took off carbs, cleaned and put in new parts and gaskets from rebuild kit.
Replaced inline fuel filter and water separator filters.
Ran them open yesterday and was only able to reach 3800-3900 RPM on both engines. The manual shows a WOT of 4400 RPMs.
Any suggestions on what else to look for to determine why they will not reach the expected WOT RPM?
--Scott
Work done on the engines to date is:
Replaced plugs and wires.
Replaced distributor cap and rotor.
Replaced ignition coil on port, starboard appears to be relatively new.
Took off carbs, cleaned and put in new parts and gaskets from rebuild kit.
Replaced inline fuel filter and water separator filters.
Ran them open yesterday and was only able to reach 3800-3900 RPM on both engines. The manual shows a WOT of 4400 RPMs.
Any suggestions on what else to look for to determine why they will not reach the expected WOT RPM?
--Scott