At a loss. Merc-1 tilt hydraulic line

[bheff]

I have a Merc-1 (pre-alpha) outdrive. I blew the tilt hydraulic line yesterday and everywhere I've searched comes up with different part numbers and lengths.
It's 3903838 sn. The line going into the distribution block under the drive is what I need. Any help or sources would be greatly appreciated.

 

[alldodge]

I'm finding 32-86036Q for the line, that is looking up your serial number and using the Merc 120/140 and a 888. Its item 7 in the link below

http://www.mercruiserparts.com/bam/subassembly/30826/1574/120

Can be found here on iboats

http://www.iboats.com/Sierra-Mercury-Power-Trim-Hose-18-2103-Sierra/dm/view_id.187592

 

[bheff]

Alldodge, like the name (have a ram myself) thanks for the link. It's number 6 on that chart.

 

[alldodge]

Alldodge, like the name (have a ram myself) thanks for the link. It's number 6 on that chart.

Looks like that one also is available 32-59842 but I don't think they actually changed the fittings in all these years, they just changed a slight bend here/there and the length of the hose. I would guess the Gen 2 hose would also work

http://www.iboats.com/Sierra-18-2109-Power-Trim-Hose/dm/view_id.172788

 

[bheff]

No Title

The length was the issue. You're link had the right one. I ordered it and had it over nighted. This is why I need it by the weekend. Thanks again for the help.

 

[alldodge]

Family times are the best, and can never be taken away. Happy fishing and the memories that go with