Bilge Pump Fuse

[Ralphy]

Searched but all the topics referring to this question were loaded with tons of general information/debates but all I really want to know is what size fuse should I use. It is a BlackMax 650 gph on a 12V system. I have a float switch hooked up inline as it is a trailered/garaged boat and I really don't need it to come on unless I am in the boat. Thanx for any help.

 

[ricksrster]

Re: Bilge Pump Fuse

Probably a 6Amp. for 600 GPH pump.

 

[ricksrster]

Re: Bilge Pump Fuse

OOps, I mean 650 GPH. Look all over the pump to see if there is anything written about the wiring and power.

 

[Ralphy]

Re: Bilge Pump Fuse

Thanx for the response rick...I did and found nada. I looked at an Atwood that was 500 gph but didn't have the float switch and it called for a 2 Amp so I am thinking somewhere around 5 or 6 but was hoping one of the experts could confirm.

 

[Boatin Bob]

Re: Bilge Pump Fuse

Not a real comon brand but found this one on eBay and it's 1100 gph, says it needs a 6amp fuse so I would think if you go to a 4 or 5 that should be more than enough. Black Max Bilge Pump

 

[Ralphy]

Re: Bilge Pump Fuse

Thanx Bob.

 

[jlinder]

Re: Bilge Pump Fuse

If you need to find the exact size you can contact Seasense. I found them on the web, and their contact info can be seen at http://seasense.com/cgi-bin/htmlos.exe/008.5.441899777200013007 <br /><br />Unfortunatly they do not say anything about the bilge pump you talk about.

 

[Duck Heaven]

Re: Bilge Pump Fuse

Here is what the manufacturer of the Bilge Pump reccomends: (6amp Fuse)<br /><br />Sea Sense Black Max Universal Bilge Pump # VG2b1035BILG <br /><br />Sea Sense bilge pump replaces: Attwood, Johnson, Mayfair, Rule and West Marine pumps. 12v. 1 1/8" hose size. Submersible. 1100 GPH/4160 LPH. 5 amp draw. 6A fuse. App 3 1/2" high x 3" diameter. VG2b1035BILGE

 

[Ralphy]

Re: Bilge Pump Fuse

Thanx Jack L I will give that a try. And appreciate your input DH, but mine is 600 GPH.

 

[Ralphy]

Re: Bilge Pump Fuse

Ok, got a 5A fuse but when I got home I noticed it is 250V. I admit to being an electricity dummy. Will it work on the 12V system?

 

[rickdb1boat]

Re: Bilge Pump Fuse

Yes, it will work....You can go over the volts, but not under...

 

[Ralphy]

Re: Bilge Pump Fuse

That's what I was hoping to hear. Thanx for the rapido response Rick!