Camera drowned

Frankhanhart

Petty Officer 1st Class
Joined
Dec 30, 2004
Messages
326
As promised, here my story about the drowned camera. Went boating with wife and stopped at an island in that nearby lake. As it happens there comes a flatbottomed boat that offers drinks and french fries. First I ever saw. Wife yelled for the camera, I got it and handed it over. She thought she had it and we both looked at the flatbottom. I let go and the camera disappeared right between the boat and the key(2 millimeters to spare at both sides). Dove after it, pinched my arm between boat and key, got the camera on the way down and got it in fresh air again. Alas it opened up but the display gave all kinds of strange messages. Tried to repair it, but to no avail(see picture). We now have a routine where we hand-over objects while looking eachother straight in the I. "You got it?" "I got it" " So if it drowns its your fault...I let go now"...etc.etc. :D <br />Frank<br />PS: if somebody is interested in that flatbottom, got a picture now with the new camera!<br />
 

kenimpzoom

Rear Admiral
Joined
Jul 13, 2002
Messages
4,807
Re: Camera drowned

I like your extra-destructive dissasebly method!!!!<br /><br />I used that same method on the camera that the wife put the batteries in backwards.<br /><br />Ken
 

cistn

Seaman Apprentice
Joined
May 30, 2005
Messages
37
Re: Camera drowned

the only problem here is your useing a wood chisel instead of a metal chisel, and you definitly need a bigger hammer,,,how was the fries??I bring a waterproof camera with me, they cost about $15.00 at most stores near the beaches and marina's,,,,good luck in the future...I got it!
 

Tacklewasher

Lieutenant Commander
Joined
Sep 18, 2002
Messages
1,588
Re: Camera drowned

Got a Pentax Optio WR just for this emergency. 3MP and water resistant. It'll take a dunking with no issues. Not rated to work underwater but I'm told it will.
 

beezee28

Master Chief Petty Officer
Joined
Jun 3, 2004
Messages
804
Re: Camera drowned

Must be a new way to troubleshoot the camera!! Got to learn how to do it on some of my non waorking equipment... :D :D
 

CATransplant

Admiral
Joined
Feb 26, 2005
Messages
6,319
Re: Camera drowned

OK...I see the bandaid on your finger. Wood chisel...claw hammer. You should be using the proper tools for the job, and you won't injure yourself. My recommendation:<br /><br />Ball Pein hammer<br />Large Cold chisel<br /><br />If that is not effective, try a 3 lb. hand sledge. I find that exceptionally effective for cell phone repair, and I haven't injured myself so far.<br /><br />Oh yes, safety glasses, please!
 

NYMINUTE

Captain
Joined
Oct 6, 2003
Messages
3,298
Re: Camera drowned

Nice Chisel FH, Looks the one I used on my Remote Key ring. Saved a swell battery though!
 

Winger Ed.

Chief Petty Officer
Joined
Mar 24, 2004
Messages
649
Re: Camera drowned

If you go ahead and nail the camera to the floor, it will be more steady while you make your adjustments on it.
 

Limited-Time

Vice Admiral
Joined
Mar 30, 2005
Messages
5,820
Re: Camera drowned

Looks like ya going at it from the wrong side....look for, "Open Other End" then turn the camera over and start again. I am sure it will be fine. Good Luck.<br /><br />PS do you work on cell phones? See, mine got run over by my truck, could use some TLC, looks like you are well suited for the task.
 
Top