Swapped out slave solenoid because i was having issues starting the boat. I had power yesterday before i removed the old part. I put the new part in today, matched connections up with pictures i took so i wouldnt mismatch connections, get everything put back together, connect battery back up, turn key and nothing.
All batteries are fully charged, I didn't forget to connect any wires. Main 50 amp circuit breaker wont push in, so i assume it didn't pop. Tested the 90 amp fuse down by the starter and that's reading that there is voltage. Checked as many fusses as i possibly could. I'm stumped now.
I'm beyond frustrated and done for the night, but in the meantime, I need ideas!
1999 Crownline 225br - mercruiser 350 mag mpi
All batteries are fully charged, I didn't forget to connect any wires. Main 50 amp circuit breaker wont push in, so i assume it didn't pop. Tested the 90 amp fuse down by the starter and that's reading that there is voltage. Checked as many fusses as i possibly could. I'm stumped now.
I'm beyond frustrated and done for the night, but in the meantime, I need ideas!
1999 Crownline 225br - mercruiser 350 mag mpi