charge coil from johnson 9.9

raczekp1

Lieutenant
Joined
Mar 30, 2010
Messages
1,327
hi.
what for are this cables going from charge coil(no 1 ,2)?
 

Attachments

  • ELECTRICK DIAGRAM2.JPG
    ELECTRICK DIAGRAM2.JPG
    95.8 KB · Views: 0

F_R

Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Re: charge coil from johnson 9.9

The charge coil generates the electricity that is used to fire the spark plugs. The two wires you ask about conduct that electricity to the power pack. Within the power pack, that electricity is stored in a capacitor until it is time to fire a spark plug. So, it is called a "charge" coil because it charges the capacitor in the power pack. There are two wires for the same reason a lamp cord has two wires. In order for electricity to do any work, it must return to the source through a second wire.
 

raczekp1

Lieutenant
Joined
Mar 30, 2010
Messages
1,327
Re: charge coil from johnson 9.9

my powerpack is not working in right way.it is not grounding ignition coils when i hit shortening switch.
i'm thinking to arange kill botton in conect switch in this two cables going from charge coils, but i dont know which one choose
maybe some other wise ideas?
i know that the best way is to order new power pack, but it engin works well, starts easily
 

F_R

Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Re: charge coil from johnson 9.9

Connecting the two charge coil wires to gether will stop it. But be careful, there is high voltage at those wires. Enough to give you a good shock.
 

raczekp1

Lieutenant
Joined
Mar 30, 2010
Messages
1,327
Re: charge coil from johnson 9.9

i'm thinking to cut one wire going from charge coil and between this cuted cables locate a switch.
is it a good idea with locating this switch in may sytuation?
this is strange thing with this powerpack. this orginal stop switch died in last yeat.
in last week i had strange situation.fllywheel cut 2 of 3 cables going from armature plat, responsibe for AC output.when this happened i had a short and engin died. i took cover of and moved a siede this cuted cables.engins started and run perfect.in home i conected back this cuted cables.start engin and took cables going from powerpack to stop switch in my fingers. i could feel some voltage on cables , when i conected cables toogather and engin dies.
i restart engin but i can conected cables as many tines as i wish but engin is NOT dieing.
 
Top