Cracks in block Volvo 2002

[elmer2000]

Unfortunately, my Volvo 2002 (mounted on a sailship), has a crack in the block, left side, just between two holes. From the crack there is a litle leak of water.<br />Is it possible to repair with some epoxi? Or it is necessary to weld? Some advice to me?<br />Thanks in advance.<br />Gabriel

 

[moderator1]

Re: Cracks in block Volvo 2002

Moving to Other Outboard Types-Troubles and Repair.

 

[WillyBWright]

Re: Cracks in block Volvo 2002

Welcome to iboats. I think you are the first South American I have seen on here but I am sure there have been many.<br /><br />There are epoxies that should help. Around here we have JB Weld which is thin and a bit runny. The best kind is Marine Tex. That is more like paste and easier to work with. There is also Alumiweld or Aluminox which comes as a stick of putty that would probably work. Surface preparation is crucial. The surfaces have to be clean and rough.<br /><br />Welding might be the best solution, but that means you have to take things apart and get new gaskets. I would try the epoxy first. It can always be removed and welded if it does not work.

 

[elmer2000]

Re: Cracks in block Volvo 2002

I epoxied the crack and seems to work. Thanks for your reply.<br />Gabriel<br />Buenos Aires, Argentina