My service manual shows .0010 - .0025. What is ideal for the rods on this model? Thanks a bunch
1946Zephyr Vice Admiral Joined Oct 21, 2008 Messages 5,556 Apr 18, 2011 #1 My service manual shows .0010 - .0025. What is ideal for the rods on this model? Thanks a bunch
1946Zephyr Vice Admiral Joined Oct 21, 2008 Messages 5,556 Apr 18, 2011 #2 Re: Crank to Rod Clearences for 1941 Johnson HD-20 Anyone?
F F_R Supreme Mariner Joined Jul 7, 2006 Messages 28,226 Apr 18, 2011 #3 Re: Crank to Rod Clearences for 1941 Johnson HD-20 Hey, they are only giving you one and a half thousandths to play with. I'd say anywhere in that little bit of leeway would be ideal.
Re: Crank to Rod Clearences for 1941 Johnson HD-20 Hey, they are only giving you one and a half thousandths to play with. I'd say anywhere in that little bit of leeway would be ideal.
B boobie Supreme Mariner Joined Nov 5, 2009 Messages 20,826 Apr 18, 2011 #4 Re: Crank to Rod Clearences for 1941 Johnson HD-20 Sounds good to me too seeing there were no needle bearings involved. I'm sure you remember "Plastic Gage" to check the clearance.
Re: Crank to Rod Clearences for 1941 Johnson HD-20 Sounds good to me too seeing there were no needle bearings involved. I'm sure you remember "Plastic Gage" to check the clearance.
1946Zephyr Vice Admiral Joined Oct 21, 2008 Messages 5,556 Apr 18, 2011 #5 Re: Crank to Rod Clearences for 1941 Johnson HD-20 Yea, I figured .0015 should be a good ball park figure to work with. Just wanted to get some more opinions from the experts
Re: Crank to Rod Clearences for 1941 Johnson HD-20 Yea, I figured .0015 should be a good ball park figure to work with. Just wanted to get some more opinions from the experts
