NHGuy
Captain
- Joined
- May 21, 2009
- Messages
- 3,631
I was putting my drive on today and for some reason the splines would not engage the coupler. After many attempts, some colorful language and frustration I decided to remove the propeller I was using and BLAM.
I had pulled an old prop off the shelf and it had no hub. So the prop was not turning the drive gears, it was only leaning on them.
Put on a prop that had positive engagement to the shaft and the drive popped on.
Learn from my mistake, don't be me.
I had pulled an old prop off the shelf and it had no hub. So the prop was not turning the drive gears, it was only leaning on them.
Put on a prop that had positive engagement to the shaft and the drive popped on.
Learn from my mistake, don't be me.