Edelbrock 1409 600 cfm question

[cantaris]

Is this a good carb for a chevy 350 with .040 over pistons, flat lifters, Edelbrock performer intake, pushing a 24 foot fiberglass?

 

[Fishermark]

Re: Edelbrock 1409 600 cfm question

Can't get any better in my opinion.

 

[TilliamWe]

Re: Edelbrock 1409 600 cfm question

Yes

 

[Bondo]

Re: Edelbrock 1409 600 cfm question

Ayuh,... Agreed...

 

[meesh]

Re: Edelbrock 1409 600 cfm question

It's a great carb, I run one on mine. Nice thing is all the gaskets are above the fuel leve so they never get wet, dry out and then shrink. Easy rebuild if you ever do have a problem but that's pretty rare.

 

[Mkos1980]

Re: Edelbrock 1409 600 cfm question

This is an excellant carb!! Its been working PERFECT with my mods below.

 

[TilliamWe]

Re: Edelbrock 1409 600 cfm question

"This is an excellant carb!! Its been working PERFECT with my mods below.
__________________
90 Chaparral 2150SX 350 MAG Alpha 1
Vortec Heads, LT4 HotCam Upgrade
GM BowTie 1.6 Roller Rockers
Edelbrock RPM Air-Gap Intake
Edelbrock 600CFM Marine Carb 64.1 MPH "

Just even more proof that small block Chevies do not need a ton of carburetion. Thanks for the first hand experience, Mkos.