Emergency Kill Switch Wiring

[hoowahfun]

hi all, trying to wrap up some loose ends (literally) to get my project boat on the water. I discovered that the emergency kill switch is not wired up and I’m not sure which wires to splice them into. I’ve got a purple and purple/white wire coming from the switch, but haven’t been able to find anything about these two wires in the electrical diagrams. Ive also got two red/yellow wires that go to the dash and then another set that has purple, green, blue, and red. Any help is appreciated.

 

[Bt Doctur]

the MOB purple white to the ""I " post of the key switch and the purple spliced to the purple you removed from the ign switch
The Yellow/ red wires are the neutral safety ,1 to the "S" postion of the switch and the other to the yellow/red you removed from the switch
another set that has purple, green, blue, and red. is the trim tilt/trailer wiring that goes to the control box handel or a remote switch (s) on the dash

 

[hoowahfun]

Great, thanks. Weather permitting I'll try it tomorrow.

 

[hoowahfun]

That was it! Thanks for the help!:joyous: