Engine internal fuel line parts

[Texasmark]

Ok. My turn to ask questions.

Thinking about redoing my engine fuel lines beins it is an '02 model; or at least having the parts on hand to fix it when it breaks. Have been all over www and can't find two things:

Zip ties or what ever you call them that lock the hoses in place (use specific, like achris showed a picture of the other day) specifically designed for Merc at least engines, and a fuel line replacement kit for my engine that contains all the pre-bent hoses used in the engine.

Engine is an '02 90 triple 2 stroke with S/N 0T 525XXX.....obviously the triple X is my specific engine identifier and I supplied enough of the SN to get where I need to be.

Thanks

Mark

 

[Fun Times]

Re: Engine internal fuel line parts

Hi there Mark, are you looking for item number 18, http://www.mercruiserparts.com/Show...ON/4663.png&inbr=3374&bnbr=80&bdesc=Fuel+Pump

Merc part number 69355 TIE STRAP, (5.50 Inches)

I believe you'll find your other parts in the link above as well. If not, here should be your parts catalog to look through.
http://www.mercruiserparts.com/selectDocs.asp?doc_nbr=803147

I don't believe there is going to be a "Hose Kit" you'll have to order them individually.

Hope this helps, Good luck.

 

[Texasmark]

Re: Engine internal fuel line parts

Hi there Mark, are you looking for item number 18, http://www.mercruiserparts.com/Show...ON/4663.png&inbr=3374&bnbr=80&bdesc=Fuel+Pump

Merc part number 69355 TIE STRAP, (5.50 Inches)

I believe you'll find your other parts in the link above as well. If not, here should be your parts catalog to look through.
http://www.mercruiserparts.com/selectDocs.asp?doc_nbr=803147

I don't believe there is going to be a "Hose Kit" you'll have to order them individually.

Hope this helps, Good luck.

Thank you sir. I'll bookmark the reply for future reference.

Mark

 

[snowbrd84]

Re: Engine internal fuel line parts

For the fuel line clamps, part number 18, I randomly found these at walmart in the automotive section with the other clamps. They came in a bag with a bunch of different sizes and they were called "Emergency Fuel Clamps". I think it was $3 for a bag of 20 in varying sizes. Merc is probably better quality obviously, but if you need them quicker than having them shipped...

 

[James R]

Re: Engine internal fuel line parts

Probably less expensive to simply get the correct shaped radius-ed Zip ties from the dealer and good hose from NAPA. I replace hoses on all the motors that I rebuild and some that I service and follow this procedure. Occasionally I have to get a shaped hose. Tighten the Zip ties using the tie tool or I find it better to use the the tip of a wide screwdriver and a pair of pliers to tighten them.