Engine mount Trim/tilt switch

[rsmitty814]

I have a 1995 Force 120 hp outboard and want what was called an optional trim switch. Lower cowl mounted switch to operate the trim motor. I have seen these for $76 but want one that is'nt gold plated. Anybody parting out an old Force that has one of these switches at a reasonable price?

 

[Frank Acampora]

Re: Engine mount Trim/tilt switch

ANY trim switch will work. Currently, I am using one from an OMC 175. You can probably buy a waterproof MOM switch from Radio Shack or other electronics store for a lot less than 75 bucks.

 

[pnwboat]

Re: Engine mount Trim/tilt switch

You can search for MOM-OFF-MOM switch. Here is an example.

Full Size Rocker Switches - 1/4'' Tabs - MOM-OFF-MOM SPDT - WiringProducts

Like Frank said...a lot cheaper than ones marketed specifically for Tilt/Trim and they're basically the same thing.

Most difficult part is cutting a hole if you chose a rocker switch. Rocker switches which are low profile and less likely to catch on anything, require a rectangular hole. A toggle switch requires a round hole which is easy to drill, but they stick out and are easily snagged.

 

[roscoe]

Re: Engine mount Trim/tilt switch

Buy one of these.

You can mount it to the transom, or the motor, or secure it to the wiring harness for the motor with a zip tie.

Waterproof, 3 wire, labeled for up/down, simple.



Transom Mounted Tilt Switch - T-H Marine Supply TTC-1-DP - iboats

 

[rsmitty814]

Re: Engine mount Trim/tilt switch

Thing is on my force there's a cutout with a plug in it. I would like it on the lower cowl where it's supposed to be.