Engine turns over wont start

jimmybillson

Cadet
Joined
Jul 3, 2012
Messages
28
hello all, question for all. I have a 60hp Evinrude, Engine turns over but wont start. it started right up 2 weeks ago. Only thing done was engine removed to put steering cable on and put back by a mechanic. Any ideas
 

jimmybillson

Cadet
Joined
Jul 3, 2012
Messages
28
its a 1995 engine, it ran fine 2 weeks ago, plugs look fouled, I have new ones ordered be in tomorrow. any one know what the gap should be set at?
 

Silvertip

Supreme Mariner
Joined
Sep 22, 2003
Messages
28,771
If the plugs are fouled, there is likely no spark. No spark can be caused by kill switch lanyard being pulled.
 

jimmybillson

Cadet
Joined
Jul 3, 2012
Messages
28
Thank you all for your input. I feel so stupid, but I figured it out. I thought it had to be tied to the motor being pulled off to have the steering cable put on by the mechanic. The fuel connection at the motor was not all the way plugged in. After i plugged it all the way in she started right up. Now I have 2 back up sets of plugs which can never hurt.

Thanks again everyone
 
Top