This questions spawned from a post from Rodbolt in a different thread... So I thought I would start a new post as it was getting of subject of the original question:
Rodbolt or anyone else that knows where/what he meant when he said: "after cleaning flip the body assy upside down and carefully epoxy the main well plugs, they tend to leak causing a hard restart after sitting for a few days and can cause a rich idle."
Could you advise me a little more precisely as to what I should epoxy to prevent leakage. I have the carb completly dissasembled and am looking at the Bowl Assembly and the Throttle body assebly and not sure exactly what you were describing. I have attached two pictures below hoping you can identify what needs to be epoxied in the pictures:
Rodbolt or anyone else that knows where/what he meant when he said: "after cleaning flip the body assy upside down and carefully epoxy the main well plugs, they tend to leak causing a hard restart after sitting for a few days and can cause a rich idle."
Could you advise me a little more precisely as to what I should epoxy to prevent leakage. I have the carb completly dissasembled and am looking at the Bowl Assembly and the Throttle body assebly and not sure exactly what you were describing. I have attached two pictures below hoping you can identify what needs to be epoxied in the pictures:
