Re: evinrude fastwin
if your gonna keep it, buy a manual. they show up quite reasonably priced on ebay...or you can go the ken cook route as JB suggests. if your not gonna keep it post a request for directions on the ask a member board at this site:
www.aomci.org<br />i just sold a 1950 fastwin and I changed the impeller on it. wasn't especially hard, but it was complicated...probably cause I had to wait 2 months for parts in between the initial inspection and the repair. my advice is to get the part in hand, then do it...much easier that way with or without a manual. hope yours is a later model. they are easier to change.
