Evinrude Selectric

[flying]

I recently purchased a 1971 60hp Evinrude with the electric shift. All seems to work well after a little TLC, but I noticed in the front of the "selectric" control head there was what was left of a round plastic peice with 2 wire going to it.
The wires were tapes of. I wish I could tell you more but litterally thats all there was. This "switch mounts at the front of the panel. Any Idea what this is supposed to be and does it need to be replaced?
Thanks

 

[tashasdaddy]

Re: Evinrude Selectric

probably where the harness for a tach plugged in. a picture would sure help. clik the blue post reply, scroll down to manage attachments, clik, here you can upload from computer or hosting site.

 

[ShrimperJosh]

Re: Evinrude Selectric

I recently purchased a 1971 60hp Evinrude with the electric shift. All seems to work well after a little TLC, but I noticed in the front of the "selectric" control head there was what was left of a round plastic peice with 2 wire going to it.
The wires were tapes of. I wish I could tell you more but litterally thats all there was. This "switch mounts at the front of the panel. Any Idea what this is supposed to be and does it need to be replaced?
Thanks

May be too little, too late, but I believe it sounds like the location of the overheating alarm.

 

[WIMUSKY]

Re: Evinrude Selectric

Shrimper - This thread is over 6 years old. Please adhere to the red box that was at the bottom of the page before you posted. 90 day old or older threads are to be left to go to the archives unless they are resurrected by the OP.....
Thanks....... WIMUSKY