exploded view of lower unit

I

iggyw1

Ensign
Joined
Oct 24, 2011
Messages
955
I am in desperate need of some help here. First of all, I have ordered a service manual from this site, however, I will not recieve it 'til after the 12th of Sept. I have my lower unit torn apart and the parts are going to arrive in two days. I would love to start putting things back together while the tear down is fresh in my mind, as soon as I get the parts delivered, before I get the service manual. Does any one here have an exploded view of my lower unit that you can forward to me by e-mail ASAP? Does anyone know where I can find this view I'm looking for on line? Please let me know where if you are familiar with a site where to find it.

I have a 1962 Evinrude 40 H.P. selectric shift, model #35933 L. I could probably put her back together properly without it, but I may need to check things out to make sure I do not miss anything. I would really appreciate it if you can send me the exploded view of the entire bottom unit so I can get things going here. I hope to be out fishing in a few days!! You can e-mail me at: iggsterw1@yahoo.com Thank you soooooo much! IGGY
 
I

iggyw1

Ensign
Joined
Oct 24, 2011
Messages
955
Re: exploded view of lower unit

KFA......Thanks for the info. I took a look at it & this is for a standard shift rod motor,not the view I was looking for for the electro magnetic shifter. The bottom is quite a bit differant between the two. Yes, the motor was very tricky to take apart for sure, and the parts are expensive, but I figured for the way the motor runs, I would invest the money in rebuilding the lower unit instead of buying a used motor that I do not know anything about. I may be buying someone elses problems that I need to sink money in to. Thanks for your help.
 
I

iggyw1

Ensign
Joined
Oct 24, 2011
Messages
955
Re: exploded view of lower unit

Daviet.......Yep, this is the info that I will need. Thanks so much for locating it for me. I am not too computer savvy, so I have a problem looking things up. Now all I have to do is figure out how to print the view LOL Thank you!
 
D

Daviet

Fleet Admiral
Joined
Sep 24, 2008
Messages
8,958
Re: exploded view of lower unit

The one I posted is for the electric shift lower unit.
 
I

iggyw1

Ensign
Joined
Oct 24, 2011
Messages
955
Re: exploded view of lower unit

Daviet, Yes i see that the one you posted is for the electric shifter. I tried my darnest to print pages 18 & 19 to no avail. All I get is the left side of the pages showing the column from page 1 to page 24. I cannot print the drawings that are on these two pages. If you have the knowledge to print those drwaings. please tell me how to do it or send it to me by e-mail if you would. I would appreciate it Daviet. Thanks again for your help on this. iggsterw1@yahoo.com
 
You must log in or register to reply here.
Top