Force 125 carb rebuild

[monstertails]

I have a 1989 force 125 outboard model number 1254x9b can someone tell me what carb rebuild kit part number i would need to order? I cant seem to find the right number. also has anyone rebuilt these carbs? I have rebuilt many other types of carbs but not ever this one and was looking for any tips or things not to do. Thanks

 

[Nordin]

Complete kit except float OEM partnumber is FK10103-2 (TC carb), only gaskets the partnumber is 7023 (source Mastertech marine).
Think this is a Sierra part number.

 

[jerryjerry05]

FK10103-2 about $80.
That's the OEM part #.
You might be able to buy it here on iBoats.

As far as a rebuild?? Usually a good cleaning works just as good, unless it's REALLLLLY crudded up.

Some carb soaks can damage the small bits of rubber or plastic (needle/seat) it can make them swell and shut off the
flow of the fuel.

Spray WD on the float bowl and get it on the gasket.
It's cork and might break if you take off(if your trying to save the gasket)

 

[monstertails]

Thanks for all the Help and info.!!