rickdb1boat
Supreme Mariner
- Joined
- Jan 23, 2002
- Messages
- 11,195
I have a 20' Pontoon with a 25 Gal. built in plastic tank. I have had 2 sending units installed and they both "Stick" at any given time, mostly near the middle of the gauge reading. Also, when the tank is full, it only reads 3/4 tank. If I hit some decent waves or give the tank a good rapping, it will start to read correctly again(Or should I say it starts working again)! Is there some kind of adjustment I need to make to the float to get an accurate reading when full and is there anything I can do to stop it from sticking? Thanks, Rick