Fuel pump conversion???

[flyboy712]

Could someone post pictures of how to do the fuel pump conversion on the old pressure tank motors or directions on how to do it.

 

[flyboy712]

Re: Fuel pump conversion???

Hey thanks for all the great replies, so it sounds like all I need to do is drill a hole in the intake port cover on one of the cylinders and thread it and hook it up to a vacuum/pressure pump and then block off the pressure port on the bottom of the engine right??? Anyways a little help would be appreciated.


Thanks
Mike

 

[rickdb1boat]

Re: Fuel pump conversion???

Maybe this will help:
http://www.sschapterpsa.com/ramblings/Converting_dual_fuel_line.htm

 

[dooma_Flatchy]

Re: Fuel pump conversion???

Ive did a search and came up with this

http://forums.iboats.com/showthread.php?t=193049&highlight=fuel+pump+conversion

and the search results here http://forums.iboats.com/search.php?searchid=229425

 

[burroak]

Re: Fuel pump conversion???

If you will do a search for fuel pump conversion, there is a wealth of advice in the archives.

 

[flyboy712]

Re: Fuel pump conversion???

rickdb1boat,

Thats exactly what I was looking for thanks. I had done a little looking around but was still a little unsure after reading some of the posts, just needed a couple pictures to put it all together. Again thank you all for contributing.


Mike