Guys, I am going thru an all stock 235(1978). I obtained it for a very reasonable price. It needs alot of tlc. Besides going thru the carbs and pulling the heads to see what the bores look like. I want to rebuild the fuel pumps. I don't know where this motor came from etc. But I do know it's been run hard. It's got a 26 chopper stuck(literally) on the lower unit. The paint on the heads was a tan color(white motor). The deflectors were completely distorted.........enough said.
As far as the part #'s for the pump goes, I can't find a part# for the 235 for 78 thru 81......a rebuild kit anyways. Doing some research on ebay(etc), I have come up with 2 sets of numbers.........393103(sierra 18-720). Is this the right pump kit for my fuel pumps? The oldest year 235 that I could find a part # for a rebuild kit was 1982. It looks correct based on the shape of the pump(older style shape at the top of the pump). I just want to be sure.
Thanks ahead of time!!
By the way, what's the best way to get a prop off the shaft that's seized? I don't have a puller.
As far as the part #'s for the pump goes, I can't find a part# for the 235 for 78 thru 81......a rebuild kit anyways. Doing some research on ebay(etc), I have come up with 2 sets of numbers.........393103(sierra 18-720). Is this the right pump kit for my fuel pumps? The oldest year 235 that I could find a part # for a rebuild kit was 1982. It looks correct based on the shape of the pump(older style shape at the top of the pump). I just want to be sure.
Thanks ahead of time!!
By the way, what's the best way to get a prop off the shaft that's seized? I don't have a puller.