rs2k
Chief Petty Officer
- Joined
- Aug 2, 2008
- Messages
- 486
What's the best way to setup a fuel system?
Look at the picture below to see what mine looks like. Except for some rust in my fuel tank the system has been working well. The fuel pump stays cool and I have no problems with fuel pump priming even when the tank is low. The line that says "To Engines" in the image goes to a tee, that then goes to both of my boat's engines. All of the components are in the fuel tank compartment. There are two separate lines that leave the fuel compartment by going through the bulkhead and to each engine (After the last tee). Is this system acceptable?
Look at the picture below to see what mine looks like. Except for some rust in my fuel tank the system has been working well. The fuel pump stays cool and I have no problems with fuel pump priming even when the tank is low. The line that says "To Engines" in the image goes to a tee, that then goes to both of my boat's engines. All of the components are in the fuel tank compartment. There are two separate lines that leave the fuel compartment by going through the bulkhead and to each engine (After the last tee). Is this system acceptable?
