fabrimacator21
Petty Officer 1st Class
- Joined
- Jun 28, 2009
- Messages
- 286
I'm almost done buffing the sparkle/flake trim that goes around my boat. Looks great except for the front. It seems like the clear coat is gone. The flakes are faded to silver instead of gold but when buffed they seem to come back. I'm not sure what to do. Hard to tell if it's getting better or worse.
Theres a SERIOUS amount of grey/black stuff coming off of it and sticking to the bonnet on the buffer. I'm assuming that is the faded flakes. I did about 2 feet and the bonnet was nearly black just from one coat of wax. Should I keep going after I clean the bonnet or will it just turn everything grey/black?
I'll try to get some pictures tomorrow.
Theres a SERIOUS amount of grey/black stuff coming off of it and sticking to the bonnet on the buffer. I'm assuming that is the faded flakes. I did about 2 feet and the bonnet was nearly black just from one coat of wax. Should I keep going after I clean the bonnet or will it just turn everything grey/black?
I'll try to get some pictures tomorrow.