Hatch lock's

[HAV2FISH]

I'm trying to replace my hatch Lock's on an Astro Bass boat. Can anyone help me find them? I need 4 all keyed the same, the shaft length is 1 1/2 inches. The diameter of the lock is 3/8 in. The longest shaft length i can find is 1 1/8

I posted this here figuring with all the boat restorers someone would have to of replaced theres and can tell me where to look.

Thanks

 

[Bob_VT]

Re: Hatch lock's

http://www.iboats.com/Marine_Works_...74100461--**********.328416583--view_id.45229

Call customer service and see if you can get them keyed alike

 

[HAV2FISH]

Re: Hatch lock's

Thanks Bob, I looked at them but they are a 1/4 shorter than what I'm replacing.

 

[SuzukiChopper]

Re: Hatch lock's

Measure your hatch thickness and not the shaft length. I'll take a leap and say that they're 1-1/8" thick which is what most of those are for. Looks like the measurements go by the hatch thickness and not the shaft length.

 

[HAV2FISH]

Re: Hatch lock's

From the top of the hatch to the slot the lock bar slides into is 1 3/8in.

 

[drewpster]

Re: Hatch lock's

Astro was bought out by Tracker marine. You may want to try to contact them. They may be able to hook you up with all the locks keyed the same. Otherwise I would try a local lock smith. I know that is a common lock. At least they could point you in the right direction.

 

[HAV2FISH]

Re: Hatch lock's

Thanks for the responses. I called Tracker today and they gave me the part number for the locks and the vendor's phone number they used back then. I then called the vendor and they are sending me the locks. I'm happy