Help me replace some parts

[MarcusRTJ]

I would like to replace the turquoise looking plate in this picture. The boat is a 99 Sea Pro v2100cc and I'd like to go back with something billet, possibly custom. Is this a possibility?

I also need to replace the bow cushions and the cushion that slips into the rail on the front of the console.

Can anyone lead me to where I might find these kind of parts? I've exhausted my searching abilities.

 

[tashasdaddy]

Re: Help me replace some parts

you can use plexi, alumium plate, starboard. for the console panel. just need some hole saws, drill, and jig saw. use existing cushion for a pattern and make new.

 

[Utahboatnut]

Re: Help me replace some parts

You could also use billet if you want to spend alot of money any fabricator could do it for you or you could buy the piece of billet and try it your self if you have the right tools. Carbon fiber might be another option call some auto custom shops they would likely be abel to hook you up with the stuff. Even try some plastics shops they usually have a wide range of things you could use on it. Even a nice piece of mahogany, or teak etc if finished properly would hold uo well and look very nice( I am a carpenter so I may be a bit biased here). As flat as it is you should be able to find a number of things that would work. Post a picture when you are finished.