help ordering v4 crossflow tools

[pcrussell50]

i'm halfway through putting back together a frankenstein v4 crossflow, ('77 powerhead with wiseco pistions on an '80 mechanical shift lower.

anyway, i want to check the driveshaft shim stack, and i reckon i need the right gauge/shim checker, and i need the right driveshaft spline socket to get my torque wrench on it.

the thing is, i'm away from my manuals right now, and will be for the next couple of weeks, so now would be the right time to mail order those tools... but i don't know the right part numbers, (because again, i'm away from my manuals). can anyone shoot me the correct pn's?

on the flip side, i'd be just as grateful to simply borrow them, postage paid, plus some wear and tear money thrown in, if you are the sort who is inclined that way.

best,

-peter

 

[Monte1961]

Re: help ordering v4 crossflow tools

Have hp # and possible model #?

 

[pcrussell50]

Re: help ordering v4 crossflow tools

lower unit is a 1980, 20" shaft, for a v4 crossflow. i'm completely sure the spline socket is the same for all the v4 crossflows, and the driveshaft shim gauge i need is for the 1980 bubbleback... although i bet the shim gauge is the same for all the v4 crossflows in 1980.

to answer your question though, i do not have any model or serial numbers. the powerhead is custom built, mostly out of 1977 parts. the lower unit/gear case is a 1980.

-peter