HELP = read the post stupid

[Jimmyp]

I need a schematic on how to hook up the required relays or the solenoid.....on the black box, or mount stand alone relays inside the boat....<br />all i have is the UNIT im starting from new and i need to no what is needed, and i will keep posting untill some INTELLIGENT person replies. <br /><br />JIM

 

[Trent]

Re: HELP = read the post stupid

How many wires are their on your motor? Two or three?

 

[Jimmyp]

Re: HELP = read the post stupid

there are 2 wires a blue and a green<br /><br />thanks jim

 

[Trent]

Re: HELP = read the post stupid

You will need two solonid switches. The blue wire is up and the green is down. WHat year is your 70HP, So I might be able to help you further??

 

[Jimmyp]

Re: HELP = read the post stupid

Trent there are 2 wires

 

[mrm]

Re: HELP = read the post stupid

Get a service manual, the info. you seek is printed there. This forum is great for geneal information. <br />MRM

 

[Jimmyp]

Re: HELP = read the post stupid

Trent : the trim & tilt is an evinrude 1996 unit<br /> the notor on the boat is a 1977 70 hp. engine with a manual tilt jim

 

[mrm]

Re: HELP = read the post stupid

Get 2 manuals if you need them. <br /> MRM<br /> ( or pay an intelligent person to fix it for you )

 

[mnmfors]

Re: HELP = read the post stupid

Hey, T & T on my merc looks like that one. It plugs into the wiring harness on my boat.<br /><br />By the way, there is no need to get all pissy, Dude. The experts on this forum are here to help, and they have helped me imensely. And if they dont know about something, they dont give bad advice, that is what makes this site great.

 

[mnmfors]

Re: HELP = read the post stupid

I went out and looked at mine again, and it does have two selonoids. One for up. One for down....Do you have these selonoids? Are you trying to convert a T & T to your motor? The selenoids look exactly like the selenoid switch for the starter (Like a Ford)

 

[Jimmyp]

Re: HELP = read the post stupid

I dont hove no relays or solenoids ,this is an outboard all i want is how to get it working<br />call evinrude they were sold to BOMIBARIDER and they have nothing,i told them it was a 1996 unit its was used no paper work still not a thing <br />i will try other message boards some one must no i see not here

 

[mnmfors]

Re: HELP = read the post stupid

I know this can be frustrating....I am pretty certain your T&T is the same as mine. I have no relays.....relays are switches I believe. I only have selonoid switches, and they are wired to the wiring harness. Have you had your motor on your pump tested? I would guess you could get the motor to run on the bench (Like a starter)<br /><br />by the way, my selonoids are located under the hood..oposite side of starter

 

[Joe Reeves]

Re: HELP = read the post stupid

JimmyP..... I've looked at the PTT assy that you're speaking of. Sorry to say that there is no way that unit is going to physically fit a 1977 70hp Evinrude or Johnson. The pictures depict the electric motor and reservoir much higher in relation to the PTT main body as compared to the PTT unit you would need.<br /><br />If you had a unit that would fit, and in looking at the pictures, if that's all of the PTT assy you have... you would need the "PTT Relay box" and it's related wiring harness that leads to the PTT switch assy, and the "PTT Switch" assy itself.<br /><br />I still have a new assy in the box, in my remaining stock, but it looks nothing like what your pictures depict.

 

[almost retired again]

Re: HELP = read the post stupid

Hi Jimmyp,<br />From what your pictures look like, you have a t&t unit from a fast-track mid section, it won't work on your 77. You need the older style t&t unit that Joe Reeves is refering to.

 

[12Footer]

Re: HELP = read the post stupid

umm...

 

[JB]

Re: HELP = read the post stupid

I wonder why you guys are wasting your time on this rude jerk. <br /><br />I takes him 5 posts to explain his problem, and then it's our fault if we haven't memorized all five. <br /><br />Better that he goes somewhere else until he learns how to state a problem, and even more important, some manners.

 

[12Footer]

Re: HELP = read the post stupid

ummm. yea, what JB said. (I wasunt smart enuf to putt it in to wrods on my last poste).

 

[mrm]

Re: HELP = read the post stupid

He's jerking your chain.<br />MRM

 

[Summer Fun]

Re: HELP = read the post stupid

hi all so why help if we are all stupid

 

[hltenterprises]

Re: HELP = read the post stupid

be nice to have an ignore or block button for jerks like this. he is what inspired me to post " Thoughts on the board"