warrior4777
Recruit
- Joined
- May 21, 2010
- Messages
- 4
Hello all,
I have a 1978 Ranger tri-hull. It has a MerCruiser I/O.This last weekend, while on the lake, I lost my steering.
I checked the cable, the steering wheel moves back and forth freely and the cable moves the rods in the engine compartment.
The outdrive is not connected to it and just swings back and forth freely. There is now some grease on the outside of the outdrive, that wasn't there before.
I was able to limp it back to the ramp by tying a rope to the outdrive and steering it manually.
I have a 1978 Ranger tri-hull. It has a MerCruiser I/O.This last weekend, while on the lake, I lost my steering.
I checked the cable, the steering wheel moves back and forth freely and the cable moves the rods in the engine compartment.
The outdrive is not connected to it and just swings back and forth freely. There is now some grease on the outside of the outdrive, that wasn't there before.
I was able to limp it back to the ramp by tying a rope to the outdrive and steering it manually.