Hooking up someone elses wiring !

[201Liberator]

I recently bought a 1990 201 Liberator King Cobra 5.7 with a cracked block, when i got it the motor was disasembled down to the short block with nothing labeled. Ok heres my problem had a new 5.7 built and I put it in and hooked up everthing that had a obvious hookup. The tilt trim motor wires (blue and green) I cant find the plug. Does it plug into the main harness coming into the motor or the motor harness itself? Or if anyone has a descent wiring diagram, the repair manual i bought stinks! Ive seen alot of very smart ppl on here so any help would greatly be appreciated. Thanks

 

[a70eliminator]

Re: Hooking up someone elses wiring !

This photo shows the trim pump and wiring.

 

[201Liberator]

Re: Hooking up someone elses wiring !

Thank You for posting that, I went and looked a little further at the wire colors and found that the wires in question are really black and red. I found a Red wire that matches the Guage coming from one of the breakers mounted on the front of my exhaust manifold, and a random loose black wire laying in the box of parts that was given to me. Can anyone confirm this is where they go? Id love to post some pics but how? Thanks again for the reply