how do i adjust shift linkage

[bradleymc]

My Evinrude 1983 70hp (ELCTE) is starting in gear when the throttle is in neutral. Is this most likely because the shift linkage needs adjustment? If so, how do I adjust it? I don't really know what's what so a picture would be helpful, Google hasn't helped me very much.

 

[durban]

Re: how do i adjust shift linkage

the adjustment can be made with the bottom linkage on photo you have to make sure the carbs butterflys & timing trigger are all synchronized too disconect the cable first i do it all by hand first then connect cable after

 

[EvstaG]

Re: how do i adjust shift linkage

One place to start would be the control cable thread in the "Top Secret File" sticky in the forum http://forums.iboats.com/johnson-ev...alling-control-cables-341885.html#post2257638

If the cables are old and look worn out/cracked, etc, you may have to look at getting a replacement set of cables. If it were me, I would also replace the throttle cable at the same time, while you are working in there. (they might even be sold in pairs any anyways.)