How do I hook up over heat alarm?

[reb0707]

Hi All, I recently purchased a boat w/ a 1984 Johnson 115. The motor did not have a overheating alarm. Well, I bought I believe the propor buzzer but it did not come with instructions on how to hook it up to the ignition. I believe I have 6 plug locations on the back of the ignition. The buzzer has what I believe to be a ground wire and 2 male plugs comming out of it. On one side of the buzzer it has a + sign and 2 sets of numbers 585993 and 22 A1J-DG. I have no idea where to hook this up. Anyone know. Thank You

 

[Big flop]

Re: How do I hook up over heat alarm?

The black wire does get grounded.
The terminal with the + gets 12volt
power on and off from the ignition switch.
The other connector, 2nd flat connector
gets the tan wire from the overheat
switches on the motor.
If you have a side mounted control box
the horn is inside the control box.
The 3 wire horn will give a short beep
when the key is turned on.

 

[reb0707]

Re: How do I hook up over heat alarm?

Thank You Big Flop, Works Great!