How do you measure shaft length?

[Salty Tricks]

I have a 1980 Johnson 15hp Model J15RCSD that is immaculate (or close) that I would lke to use as a kicker. Can you tell me what the shaft length is or how I measure it. Thanks, Michael

 

[willamettejeff]

Re: How do you measure shaft length?

Ok, so you got me to look at your post. I still don't have a good answer for you though.

 

[JB]

Re: How do you measure shaft length?

The model number suggests a short (15") shaft.<br /><br />You can confirm by measuring from the bottom surface of the mount (where it sits on the transom) to the AV plate.<br /><br />Good luck.

 

[bubbakat]

Re: How do you measure shaft length?

 

[Joe Reeves]

Re: How do you measure shaft length?

In addition to the above, the approximate measurements equal.......<br /><br />15" = Short Shaft<br /><br />20" = Long Shaft<br /><br />25" = Extra Long Shaft

 

[Salty Tricks]

Re: How do you measure shaft length?

15" it is ! Measured to confirm, thanks. A short shaft! Maybe because I'm Irish? <br /><br />now I guess I need an extension kit or a bracket mount. Which?

 

[Salty Tricks]

Re: How do you measure shaft length?

oops!! This is for my BW Montauk and requires a 20". This according to the Whaler geek forum who recommend bolting direct to transom. However which is the least of two evils...a 5" extension kit or a adjustable bracket?

 

[JB]

Re: How do you measure shaft length?

I would go for the bracket, ST.<br /><br />It would allow you to get the lower end out of the water when not in use without the powerhead intruding into the cockpit space.<br /><br />Good luck.

 

[martinphantom]

Re: How do you measure shaft length?

Doesn't lowering it more than a couple of inches affect operation of some components?