So I was pretty stupid today. It was warm enough so I started putting resin on the stringers and cross pieces. As they started to kick, the wind kicked up and some clouds appeared. The tempeture dropped so I put the pieces back in the boat, put up a tarp over the boat and put a heater in it. Being the brilliant person I am and patting myself on the back for fixing the temp issue I decided to finish the cross pieces while they were in their appropriate spaces. DOOOOE. Then I got a call and had to leave for about 25 minutes.
So I guess I learned something today, Wet resin put on top of resin that is halfway set up is not the smartest thing to do. I had planned on pulling the cross pieces so that I could start putting the glass over the stringers. Well after much struggling and a few choice words I was able to free all but two of them. Those two are in the way of me putting the foam pieces back in under the rear deck. I guess I am only some dumb not quite plumb dumb.
e-somedumb-lark7
my floor replacement
http://forums.iboats.com/showthread.php?t=353066
So I guess I learned something today, Wet resin put on top of resin that is halfway set up is not the smartest thing to do. I had planned on pulling the cross pieces so that I could start putting the glass over the stringers. Well after much struggling and a few choice words I was able to free all but two of them. Those two are in the way of me putting the foam pieces back in under the rear deck. I guess I am only some dumb not quite plumb dumb.
e-somedumb-lark7
my floor replacement
http://forums.iboats.com/showthread.php?t=353066