My boat was restored and my new Hydraflex hydraulic sterring is okay, there is a little play in the port direction of the wheel. I also noticed a small amount of fluid bubbling out of the fill port and the gasket is cracked. I had it installed at a shop over a year ago and now after driving several other boats with similar systems, I am not happy. The boat shop is notoriuos for keeping my boat 3-6 weeks even for minor service so the mechanic told me I should drain it and re-fill and re-prime it. I have the manual and have tried but it seems to be the same. Any suggestions on the bleeding process as I am going to try it again. Thanks Mark
