I have a 2005 Merc 25HP 4S BigFoot TnT & a Quicksilver 4000 control.<br /><br />I got the tach wired but can not determine which wires are for the connection to the warning lights for Oil & temp.<br /><br />I finally found the tilt wires, they were disconnected at the motor & not in the main cable connector.<br /><br />The controller supposed to have warning buzzers so I assume the same wires could be run to the console for the warning lights. Some times I do not hear so good.<br /> I could not find the warning buzzers in the controler.<br /><br />The controller instructions did not have a wiring diagram, the dealer did not know of any wiring diagram, but if I brought the boat in they could fiqure it out at $80.00/hr.<br />I purchase the latest Merc motor manual from Mercury for the 25HP bigFoot but if did not include the 2004 & 2005 motors. The wiring diagrams that were in it were wrong.<br /><br />Any suggestions.
