Identify old Sea Nymph

troutroller

Recruit
Joined
Aug 13, 2010
Messages
5
I am trying to identify a 12ft boat which I currently suspect is an old Sea Nymph 12A cartopper.
I first thought it was a Sears as Sea Nymph has made boats for them for many years but I found
no Sears that had the 5 keel bottom, no strakes, and the characeristic seat to hull supports that
Sea Nymphs have had for ages. On the starboard upper corner at the stern there are two metal studs suggesting that at one time a S/N plate once existed there. The seats are all aluminum, no wood. The boat is very light, I would guess not much more thab 90 lbs at most. The manufacturers plate and USCG capacity plate are gone. Would appreciate any opinions as to the the approximate year and manufacturer of this boat. Thank you.
 

Attachments

  • Lewisboro-20110925-00061.jpg
    Lewisboro-20110925-00061.jpg
    68.3 KB · Views: 0
  • Lewisboro-20110925-00058.jpg
    Lewisboro-20110925-00058.jpg
    70.6 KB · Views: 0
  • Bedford-20110921-00050.jpg
    Bedford-20110921-00050.jpg
    74.3 KB · Views: 0
  • Lewisboro-20110925-00059.jpg
    Lewisboro-20110925-00059.jpg
    46.9 KB · Views: 0

troutroller

Recruit
Joined
Aug 13, 2010
Messages
5
Re: Identify old Sea Nymph

Nope. On the outside of the stern at the starboard upper corner there are two metal pins which
look alot to me like they use to hold down a serial number strip plate. Unfortunately that's gone.
No HIN anywhere on inside of transom either.
 
Top