looking for water intake screen

[juno pierrat]

while removing the prop shaft bearing housing i used to much heat and melted the plastic intake screen. its "unavailable" on every site I've tried. 320042 water intake screen, its used in 35, 40 48, 50, 60 hp lower inits from around 1980 to 1988. maybe someone has an old trashed lower unit that's already been parted out and could pry one out. it was only about 14.00 new but for time and effort its worth more then that to me. Help!

 

[Scott Danforth]

buy new, and replace every 2-3 years with the impeller.

the plastic gets brittle and they break after 5 years.

 

[Stumpalump]

I needed that same part last year. Not available and nobody online had one. I called the local shops that have been in buisness for decades and found one.
This is the place but call around your local shops and you might get lucky. https://www.glendalemarineaz.com/?gclid=CPPQvrvMoNYCFQEHaQodTaIFrw

 

[flyingscott]

0314175

SCREEN, Water intake

 

[flyingscott]

Look at the 3 cylinder screen and see if you can make it fit as that one is still available.

 

[juno pierrat]

seem to recall a place in the northwest, Washington, that's been recommended for unusually parts requests. but have brain fade, thanks for any help.

 

[Faztbullet]

Seaway Marine.......