Lower seal - Did I install it wrong?- HELP!

Fl_Richard

Lieutenant
Joined
Jan 21, 2005
Messages
1,428
Lower seal - Did I install it wrong? Tossed the original part and when I installed the seal into the bottom plate I thought I'd installed it it the right direction. But looking at it today it looks odd.

Sanity check please. Is the actual seal (orange part) installed in the right orientation? Being able to see the actual spring has me concerned. Sorry for the links but I don't know how to post a big picture here.

Thanks

Richard

1995 J150EXEOM

Exhaust plate view
http://www.musiceverywhere.com/BoatPix/IMG_0664.JPG

Close up of seal
http://www.musiceverywhere.com/BoatPix/IMG_0663.JPG
 
Last edited:

ob

Admiral
Joined
Aug 16, 2002
Messages
6,992
Re: Lower seal - Did I install it wrong?- HELP!

Looks to be installed right to me.I only hope the goop I am seeing in the pic is grease and not rtv sealant between the seal and crankshaft.
 

F_R

Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Re: Lower seal - Did I install it wrong?- HELP!

I think it's it is urpside down. The parts diagram shows which way it is supposed to go. Check it out at http://shop.evinrude.com/
Use the + button to enlarge the picture.
 

Fl_Richard

Lieutenant
Joined
Jan 21, 2005
Messages
1,428
Re: Lower seal - Did I install it wrong?- HELP!

It's Grease -

Admiral says OK - Fleet Admiral says upside down... Battle of the brass.

Who's right? I think I got it right but I'm looking for someone who knows for sure before I seal the deal.

Thank you!
 

jonesg

Admiral
Joined
Feb 22, 2008
Messages
7,198
Re: Lower seal - Did I install it wrong?- HELP!

Just looked in the service manual, you have it right.
The photo's are very clear.

Theres a wide edge and a narrow edge,
the narrow goes toward the prop
wide edge towards the crank.
 

F_R

Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Re: Lower seal - Did I install it wrong?- HELP!

Well, ok after a second and third and fourth look at the picture, I've decided it is correct. The open side of the shell goes up. It looks like that's the way you have it. Sorry about the confusion.
 

Fl_Richard

Lieutenant
Joined
Jan 21, 2005
Messages
1,428
Re: Lower seal - Did I install it wrong?- HELP!

Thank you! Thank you! Thank you.

It's soo hard to get back to where I'm at I knew it would be best to ask the experts!!

I'll let you know how she purrs!


Richard
 
Top