Making your own junction box

[halas]

cut out from 1/2" thick PVC panel

pop rivet on the 2 logs

Then pop rivet the unit into the Home Depot exterior junction box

This is the battery box goes up front into the bow

This is the junction box near the transom where I can safely connect the heavy copper wires to the outboard.

[/IMG]

 

[Texasmark]

Re: Making your own junction box

Very nice workmanship/design.

So what part required the sacrifice of the left thumb? LOL

Mark

 

[halas]

Re: Making your own junction box

Very nice workmanship/design.

So what part required the sacrifice of the left thumb? LOL

Mark

Mark, thanks and I don't remember.

One more think: the circuit to the junction box is protected with a 60 Amp fuse: connecting logs, heat shinking tube to make a safe and tight connect, then in a flexible electrical conduit under the gunwale to the junction box aft.