FloridaChris87
Recruit
- Joined
- Mar 21, 2015
- Messages
- 4
Hey guys, I am looking to replace my key switches as they are pretty weathered and I am replacing a few other console electronics. Was hoping to get a second opinion on the key switches I need. I think this is the correct kit, but I am not 100%. The only concern I have is that my key switch isn't connected by a 6 pin adapter or anything, it is directly hard wired to each component. The kit I found has the 6 pin and they're all black and white, opposed to the colored wires I have on my now, which I believe is OEM.
The motors are 2001 Mercury V6 200HP DFI 3.0L. One is obviously counter rotation. The serial number is OT280244 for one of the motors.
Open to any and all advice!
Here is the kit I think I need: http://www.*****************/newparts...MER87-88107A13
If the link doesn't work the part number is : 87-88107A13
The motors are 2001 Mercury V6 200HP DFI 3.0L. One is obviously counter rotation. The serial number is OT280244 for one of the motors.
Open to any and all advice!
Here is the kit I think I need: http://www.*****************/newparts...MER87-88107A13
If the link doesn't work the part number is : 87-88107A13
Attachments
Last edited: