Native Cracker
Recruit
- Joined
- Jan 22, 2012
- Messages
- 2
Friend has '94 90hp sport jet in a pro line. Not getting spark.
Red stator
Ohm g/w w/g = .684
Has adaptor single blue to switch box.
Red from swith box not connected.
Trigger ohms
Brn+w/b= 1.218k
Pur+w/b = 1.212k
W+w/b = 1.259k
with b/y dissconected.
No spark
With y y dissconected.
No spark.
few things that strike me. First I have two b/y kill switch wires coming from harness.
Second the brn from trigger has a jummper between rev limiter and switch box.
Book shows jumper on a single b/y. And two brns from switch box.
Third is an extra purp and tan/blue coming out of the harness. "tryed switching purp to rev limiter. And repeated b/y and y y disconnet. No spark.
Lastly the red wires coming from the 20amp fuse above regulator are both hooked to the starter rellay. Book shows one going to a red/purple in harness that is not present.
THANKS FOR ANY HELP! If I missed anything ill post asap!!
Red stator
Ohm g/w w/g = .684
Has adaptor single blue to switch box.
Red from swith box not connected.
Trigger ohms
Brn+w/b= 1.218k
Pur+w/b = 1.212k
W+w/b = 1.259k
with b/y dissconected.
No spark
With y y dissconected.
No spark.
few things that strike me. First I have two b/y kill switch wires coming from harness.
Second the brn from trigger has a jummper between rev limiter and switch box.
Book shows jumper on a single b/y. And two brns from switch box.
Third is an extra purp and tan/blue coming out of the harness. "tryed switching purp to rev limiter. And repeated b/y and y y disconnet. No spark.
Lastly the red wires coming from the 20amp fuse above regulator are both hooked to the starter rellay. Book shows one going to a red/purple in harness that is not present.
THANKS FOR ANY HELP! If I missed anything ill post asap!!