Fishatron
Cadet
- Joined
- Jun 30, 2009
- Messages
- 28
Hello everyone!
I've been addicted to browsing and reading the threads in this section (also the resto section) for nearly a month or so.
Anyways, I'm looking for a 16-18' Starcraft SS or Holiday (prefer the SS for the bowrider). I'm not looking for a project but I don't mind doing alittle bit of work, I'm mechanically inclinded also.
Today I went and checked out an 18' 1979 SS with a 120 hp Evinrude V4 ('78 i think). It was in decent enough shape inside, bow seat cushions were good, cockpit seats were cracked/ripped around the corners edges. The floor was springy feeling but not soft feeling. The transom had been repalced 6 years ago, and looked good. the motor was nice looking (not an engine expert). So far I was pretty happy. Then i start to check the hull and I notice a 6" sq patch panel that had been riveted on, on the bottom of the hull (would be approx under the passenger side jump seat, sorry don't know my nautical sides/terms). The sellers had no idea it was there (I believe them, they seem like good people), they have had the boat for 6 years. Probably from the PO. They hadn't really noticed any leaks, they never had to use the bilge pump and admitted the bilge did not work anymore.
Should this patch deter me??
The price is fair but not like what some of you guys are finding.
Sorry about the long post. Thanks in advance!
Keep up with the Starcraft restos!!
I've been addicted to browsing and reading the threads in this section (also the resto section) for nearly a month or so.
Anyways, I'm looking for a 16-18' Starcraft SS or Holiday (prefer the SS for the bowrider). I'm not looking for a project but I don't mind doing alittle bit of work, I'm mechanically inclinded also.
Today I went and checked out an 18' 1979 SS with a 120 hp Evinrude V4 ('78 i think). It was in decent enough shape inside, bow seat cushions were good, cockpit seats were cracked/ripped around the corners edges. The floor was springy feeling but not soft feeling. The transom had been repalced 6 years ago, and looked good. the motor was nice looking (not an engine expert). So far I was pretty happy. Then i start to check the hull and I notice a 6" sq patch panel that had been riveted on, on the bottom of the hull (would be approx under the passenger side jump seat, sorry don't know my nautical sides/terms). The sellers had no idea it was there (I believe them, they seem like good people), they have had the boat for 6 years. Probably from the PO. They hadn't really noticed any leaks, they never had to use the bilge pump and admitted the bilge did not work anymore.
Should this patch deter me??
Sorry about the long post. Thanks in advance!
Keep up with the Starcraft restos!!