Need carb kit for old Evinrude 3hp twin

[Buschman58]

I was given an old twin cylinder 3hp outboard Evinrude and I need a carb rebuild kit, but I don't have a model number, only a serial number. The number is 3012-31530. The side panels are missing and this is the only number on the motor. This motor is quite old as it has the mixture knobs up front. Any help to find parts or a pointer in the right direction would be greatly appreciated.

 

[Hooty]

Re: Need carb kit for old Evinrude 3hp twin

You can start at your NAPA store, they handle some ourboard engine parts. You should be able to look at the carburetor and get a general of what the gaskets look like. Go to your NAPA store and look at their Marine catalog under Johnson/Evinrude Fuel System pages and look at the gasket sets. If not there, try:<br /><br /> Twin City Outboard <br /><br />c/6<br /><br />Hooty

 

[blue bayou]

Re: Need carb kit for old Evinrude 3hp twin

You would be surprised but this is a common old evinrude. I have one on a small boat I just built and found parts at the local marine store. In stock. I have an extra carb kit in stock for the future and should cost you about $15-$20.