I have a 1997 90 SPL. I suspect the boat going into limp mode because of overheating but get no buzzer alarm.
No beeeep when key first turned on
I can ground the brown wires from either head sensor (going back to harness) and nothing.
I can disconnect horn at plug and apply 12V and horn works,
Is there a place I can check at the key switch, or someplace else?
No beeeep when key first turned on
I can ground the brown wires from either head sensor (going back to harness) and nothing.
I can disconnect horn at plug and apply 12V and horn works,
Is there a place I can check at the key switch, or someplace else?